世界的で更新スピードが最も速いIT認証試験問題集

http://www.japancert.com/

JN0-691全真模擬試験、JN0-691無料過去問

アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はJuniperのJN0-691全真模擬試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JapanCertはあなたに難しいJN0-691全真模擬試験に合格することを助けてあげますから。

ITテストと認定は当面の競争が激しい世界でこれまで以上に重要になりました。それは異なる世界の未来を意味しています。JuniperのJN0-691全真模擬試験の試験はあなたの職場生涯で重要な画期的な出来事になり、新しいチャンスを発見するかもしれません。ところが、JuniperのJN0-691全真模擬試験の試験にどうやって合格しますか。心配することはないですよ、ヘルプがあなたの手元にありますから。JapanCertを利用したら恐いことはないです。JapanCertのJuniperのJN0-691全真模擬試験の試験問題と解答は試験準備のパイオニアですから。

JapanCertのJuniperのJN0-691全真模擬試験はPDF形式とソフトウェアの形式で提供します。それはJapanCertのJuniperのJN0-691全真模擬試験の問題と解答を含まれます。そして、その学習教材の内容はカバー率が高くて、正確率も高いです。それはきっと君のJuniperのJN0-691全真模擬試験に合格することの良い参考資料です。もし不合格になる場合は、ご心配なく、私たちは資料の費用を全部返金します。

JN0-691試験番号:JN0-691全真模擬試験
試験科目:「Junos Troubleshooting」
最近更新時間:2016-01-20
問題と解答:135

>> JN0-691全真模擬試験

 

JapanCertはJuniperのJN0-691全真模擬試験の最新の問題集を提供するの専門的なサイトです。JuniperのJN0-691全真模擬試験はJN0-691全真模擬試験に関する問題をほとんど含まれます。私たちのJuniperのJN0-691全真模擬試験を使うのは君のベストな選択です。JapanCertは君の試験を最も早い時間で合格できる。学習教材がどんな問題があっても、あるいは君の試験を失敗したら、私たちは全額返金するのを保証いたします。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/JN0-691.html

NO.1 Which two statements are true about firewall filters and policers? (Choose two.)
A. If an input firewall filter is configured on the same logical interface as a policer, the policer is
executed first.
B. If an output firewall filter is configured on the same logical interface as a policer, the policer is
executed first.
C. If an output firewall filter is configured on the same logical interface as a policer, the firewall filter
is executed first.
D. If an input firewall filter is configured on the same logical interface as a policer, the firewall filter is
executed first.
Answer: A,C

JN0-691模擬試験   JN0-691復習資料   

NO.2 Which two Junos OS commands are helpful in confirming whether an Object Identifier (OID)
has recorded the correct data? (Choose two.)
A. show snmp v3
B. show snmp mib walk
C. show snmp mib get
D. show snmp statistics
Answer: B,C

JN0-691ソリューション   JN0-691ふりーく   

NO.3 Click the Exhibit button.
-- Exhibit [email protected]> show system processes extensive last piD.4160; load averages: 0.13, 0.08,
0.07 up 2+02:47:50 21:13:39 120 processes: 17 running, 90 sleeping, 1 zombie, 12 waiting
Mem: 141M Active, 96M Inact, 517M Wired, 160M Cache, 112M Buf, 55M Free Swap:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 1271 root 7 76 0 514M
63724K select 0 157.9H 280.42% flowd_octeon_hm 22 root 1 171 52 0K 16K RUN 0 43.3H 83.45%
idlE.cpu0 4158 lab 1 78 0 49192K 16440K select 0 0:00 2.25% cli 1255 root 1 76 0 114M 17604K select
0 41:47 0.00% chassisd 24 root 1 -20 -139 0K 16K WAIT 0 18:50 0.00% swi7: clock 1293 root 1 76 0
12476K 6484K select 0 9:25 0.00% license-check 4159 root 1 76 0 38608K 5720K select 0 0:00 0.00%
mgd ... 36 root 1 8 0 0K 16K usbevt 0 0:00 0.00% usb1 33 root 1 8 0 0K 16K usbevt 0 0:00 0.00% usb0
4160 root 1 77 0 24260K 1816K CPU0 0 0:00 0.00% top 1176 root 1 -8 0 0K 16K mdwait 0 0:00 0.00%
md2 7 root 1 8 0 0K 16K - 0 0:00 0.00% thread taskq 1186 root 1 -8 0 0K 16K mdwait 0 0:00 0.00%
md3 0 root 1 -8 0 0K 0K WAIT 0 0:00 0.00% swapper -- Exhibit -
Referring to the exhibit, which Junos OS process was the last one to start?
A. swapper
B. top
C. flowd_octeon_hm
D. cli
Answer: B

JN0-691信頼度   JN0-691勉強ガイド   

NO.4 Which statement is true regarding rpd scheduler slips?
A. rpd scheduler slips indicate that the routing process cannot implement a configured policy.
B. rpd scheduler slips indicate that the routing process is too busy.
C. rpd scheduler slips indicate that the routing process has failed.
D. rpd scheduler slips indicate that the routing process must be restarted.
Answer: B

JN0-691テスト問題集   

NO.5 -- Exhibit -
[email protected]> show system switchover
Graceful switchover: On
Configuration databasE.Ready
Kernel databasE.Version incompatible
Peer statE.Steady State
-- Exhibit -
You have enabled graceful Routing Engine switchover (GRES). During verification, you switched
mastership and all interfaces went down.
Referring to the output shown in the exhibit, why did the interfaces go down?
A. The synchronization failed because the Junos OS version on the backup is incompatible with the
version running on the master.
B. The synchronization failed because the master Routing Engine cannot communicate with the
backup Routing Engine.
C. The synchronization failed because the Junos OS version on the backup does not support GRES.
D. The synchronization failed because the Routing Engine models are different between the master
and backup.
Answer: A

JN0-691参考資料   

NO.6 An interface on your Junos device reports a device-level flag of Loopback-detected.
What is causing this flag to be reported?
A. The link-layer protocol failed to successfully connect with the remote endpoint.
B. The interface link layer received its own frames.
C. The interface was administratively disabled.
D. The interface is in promiscuous mode and sees frames addressed to all physical addresses on the
medium.
Answer: B

JN0-691認証   

NO.7 When using change-control processes, which three actions must be considered? (Choose
three.)
A. Coordinate scheduling that will be least impactful to production.
B. Coordinate scheduling that works best with the individuals involved.
C. Formalize the request based on company policies.
D. Balance troubleshooting needs with productions risks.
E. Perform testing in a production environment prior to change-control.
Answer: A,C,D

JN0-691サンプル   

NO.8 Which two tools would be used to troubleshoot BGP peering problems? (Choose two.)
A. the link-state database
B. the monitor traffic interface command
C. traceoptions
D. the inet.3 routing table
Answer: B,C

JN0-691トレーニング   


Related Links: http://jn0-691-pdf-exam19.emc-certifications.com
投稿日: 2016/1/21 1:30:10  |  カテゴリー: Juniper  |  タグ: JN0-691取得Juniper